Special mulcher with EXTRA LOW chassis (maximum 49 cm) developed for working in the interior of the orchards, vineyards, etc up to 6-7 cm diameter.
Standard equipment
– Reinforced fixed centered linkage CAT I-II.
– Gearbox with free wheel.
– Helicoidal hammer rotor.
– Back roller of 170 mm of diameter.
– Joints without greasing points, with self-lubricated bushings all-round.
– Special tensile for belts with third pulley by bolt
– 1 row of special crest shaped.
– 1 row of special triple-crest, bolted-on, U-shaped Niubo counter knife.
– Chassis with angle anti-hits.
– Rear door.
– Accident prevention precautions according to EC regulations.
– Note: all models are supplied with series hammers; except when specified with blades in the order.
Models
 |  |  |  |  |  |  |  |  |  | |
|---|---|---|---|---|---|---|---|---|---|---|
| MOD. | MM | KG | Nº | Nº | C.V. | R.P.M | Nº | MM | MM | MM |
| TKM130 | 1300 | 610 | 14 | 28+14 | 50-90 | 540 | 4 | 1500 | 860 | 1290 |
| TKM150 | 1500 | 650 | 16 | 32+16 | 50-90 | 540 | 4 | 1700 | 860 | 1290 |
| TKM160 | 1600 | 685 | 16 | 32+16 | 50-90 | 540 | 4 | 1800 | 860 | 1290 |
| TKM180 | 1800 | 720 | 20 | 40+20 | 60-90 | 540 | 4 | 2000 | 860 | 1290 |
| TKM200 | 2000 | 775 | 22 | 44+22 | 60-90 | 540 | 5 | 2200 | 860 | 1290 |
| TKM220 | 2200 | 825 | 24 | 48+24 | 60-90 | 540 | 5 | 2400 | 860 | 1290 |
| TKM250 | 2500 | 910 | 24 | 48+24 | 80-100 | 540 | 5 | 2700 | 860 | 1290 |
| TKM280 | 2800 | 960 | 24 | 48+24 | 90-110 | 540 | 5 | 3000 | 860 | 1290 |
| TKM300 | 3000 | 990 | 26 | 52+26 | 90-110 | 540 | 5 | 3200 | 860 | 1290 |
