Mulcher designed for forestry use due to its extreme robustness in all parts of the machine.
Standard equipment
– Hammers rotor balanced using an electronic method.
– Fixed centered linkage CAT II-III.
– Extremely robust gearbox.
– Very hard chassis anti-wear.
– Rear deflector that helps drawing the branches to the rotor, when the machine works backwards.
– Articulations without greasing points, with self-lubricating bushings.
– Rotor with very reliable self-alligning-spherical-roller bearings on their hubs.
– 2 rows of screwed counter hammers.
– Adjustable skids.
– Hydraulic rear door with two cylinders.
– Double side drive by toothed belts C-type.
– Special hammers 360º
– Frontal and rear protection with chains.
– Track pins and cardan shaft.
– Ready for tractors with power take off of 1000 rpm
– Accident prevention precautions according to CE regulations.
– Note: if is specified in the order it can be prepared with power take-off of 540 rpm.
Models
 |  |  |  |  |  |  |  |  |  | |
|---|---|---|---|---|---|---|---|---|---|---|
| MOD. | MM | KG | Nº | C.V. | Ø | R.P.M. | Nº | MM | MM | MM |
| TYF180 | 1800 | 1975 | 28 | 120-130 | 30 | 1000 | 4+4 | 2385 | 1180 | 1490 |
| TYF200 | 2000 | 2150 | 32 | 130-140 | 30 | 1000 | 4+4 | 2585 | 1180 | 1490 |
| TYF220 | 2200 | 2300 | 36 | 140-160 | 30 | 1000 | 4+4 | 2785 | 1180 | 1490 |
