Special mulcher for working with pruning residues of up to 8 cm in diameter, in olive grove s, vineyards, fruit orchards, citrus, corn, grass, etc.
Standard equipment
– CAT I-II three point hitch on solid zinc plated bars.
– Mechanic back dor for inspection
– Crank sideshift.
– Joints without greasing points, with self-lubricated bushings all-round.
– Gearbox with free wheel.
– Back roller of 220 mm of diameter with scraper.
– Support with protection for back roller bearings.
– Third pulley tensioner, bolt adjustable.
– 1 row of special counter knives.
– 1 row of special crest shaped Super Crushing System counter knife.
– Reinforced steel protection plates.
– Track pins and PTO shaft.
– Accident prevention precautions according to EC regulations.
– Note: all models are supplied standard with hammers, unless otherwise specified (blades) by the order.
Models
 |  |  |  |  |  |  |  |  |  | |
|---|---|---|---|---|---|---|---|---|---|---|
| MOD. | MM | KG | Nº | Nº | C.V. | R.P.M | Nº | MM | MM | MM |
| TTN160 | 1600 | 700 | 16 | 32+16 | 48-58 | 540 | 4 | 1800 | 940 | 1250 |
| TTN180 | 1800 | 740 | 20 | 40+20 | 55-65 | 540 | 4 | 2000 | 940 | 1250 |
| TTN200 | 2000 | 790 | 22 | 44+22 | 65-70 | 540 | 5 | 2200 | 940 | 1250 |
| TTN220 | 2200 | 860 | 22 | 44+22 | 70-85 | 540 | 5 | 2400 | 940 | 1250 |
| TTN250 | 2500 | 915 | 24 | 48+24 | 85-120 | 540 | 5 | 2700 | 940 | 1250 |
