Forestry multifunctional tiller-mulcher intended for use in both depth work (250-300mm) and forest mulching.
Standard equipment
– Centered fixed three point hitch CAT III.
– Special gearbox with oil cooler.
– Inner chassis coated with replaceable Hardox plates.
– Removable end-hub rotor.
– Depth-control skids in Hardox.
– Chassis equipped interchangeable front blades for ground penetration in Hardox.
– Hammer supports made of Hardox with special wedge geometry that ballow for an improved work in the milling mode.
– Exclusive Niubo hammers designed specifically for working in the deep.
– Narrower belt casing, with Hardox lining, that allows a better penetration into the ground.
– Doubled belt transmission with 2 high performance Polychain belts.
– 3 rows of Hardox counter knives.
– Joints without greasing points, with self-lubricated bushings all-round.
– PTO shaft with torque limiter and bolts.
– Weight indicated in the data table with TAC335 roller included.
– Protection to prevent accidents according to EC regulations.
Models
 |  |  |  |  |  |  |  |  |  |  | |
|---|---|---|---|---|---|---|---|---|---|---|---|
| MOD. | MM | KG | Nº | C.V. | Ø | MM PROFUNDIDAD | R.P.M. | Nº | MM | MM | MM |
| TDS200 | 2000 | 4850 | 48 | 180-280 | 40 | 250-300 | 1000 | 2 | 2350 | 2221 | 1276 |
| TDS220 | 2200 | 5000 | 54 | 180-280 | 40 | 250-300 | 1000 | 2 | 2550 | 2221 | 1276 |
| TDS250 | 2500 | 5500 | 63 | 180-280 | 40 | 250-300 | 1000 | 2 | 2890 | 2221 | 1276 |
