Multiple purpose flail mower for working with grass, vine shoots and branches of up to 4-5 cm of diameter.
Standard equipment
– New design of extra reinforced chassis with throwing over the back roller.
– Helicoidal rotor.
– Outer gearbox with free wheel.
– Three-point-hitch CAT II-III.
– 170 mm backroller.
– Skids.
– 1 row of special crest shaped bolted-on Niubo counter knife.
– 1 row of “U” shaped counter knife.
– Sideshift cylinder with safety valve anti shock
– Floating mechanical.
– Tilt cylinder with flow adjustment.
– Joints without greasing points, with self-lubricated bushings all-round.
– Third pulley tensioner, bolt adjustable.
– Built in belt casing.
– Protective bumper.
– Main stand.
– Track pins and PTO shaft.
– Pre-arrangement for double PTO shaft kit.
– Accident prevention precautions according to EC regulations.
– Note: all models are supplied with hammers standard, unless otherwise (with blades) specified by the order.
Models
 |  |  |  |  |  |  | |
|---|---|---|---|---|---|---|---|
| MOD. | MM | KG | Nº | Nº | C.V. | R.P.M. | Nº |
| TKP160 | 1600 | 912 | 16 | 32+16 | 60-110 | 540 | 4 |
| TKP180 | 1800 | 944 | 20 | 40+20 | 70-110 | 540 | 4 |
| TKP200 | 2000 | 995 | 22 | 44+22 | 80-150 | 540 | 4 |
| TKP220 | 2200 | 1080 | 22 | 44+22 | 90-180 | 540 | 4 |
| TKP250 | 2500 | 1280 | 24 | 48+24 | 110-180 | 540 | 5 |
 |  |  |  |  |  |  |  |  |  | |
|---|---|---|---|---|---|---|---|---|---|---|
| MOD. | MM | MM | MM | MM | MM | MM | MM | MM | º | º |
| TKP160 | 2135 | 1076 | 507 | 379 | 1757 | 2500 | 2925 | 2260 | 90º | -42º |
| TKP180 | 2335 | 1076 | 507 | 379 | 1957 | 2500 | 3125 | 2260 | 90º | -42º |
| TKP200 | 2535 | 1076 | 507 | 379 | 2157 | 2500 | 3325 | 2260 | 90º | -42º |
| TKP220 | 2735 | 1076 | 507 | 379 | 2357 | 2500 | 3525 | 2260 | 90º | -42º |
| TKP250 | 3035 | 1076 | 507 | 379 | 2657 | 2500 | 3825 | 2260 | 90º | -42º |
