Polyvalent mulcher for working with grass, vine shoots and branches of up to 4-5 cm of diameter.
Standard equipment
– New design of extra reinforced chassis with throwing over the back roller.
– Helicoidal rotor.
– Inner gearbox with free wheel.
– Three-point-hitch CAT II-III.
– 170 mm backroller.
– Skids.
– Very reinforced rotor and hubs.
– 1 row of special crest shaped bolted-on Niubo counter knife.
– 1 row of “U” shaped counter knife.
– Sideshift cylinder with safety valve anti shock
– Floating mechanical.
– Tilt cylinder with flow adjustment.
– Joints without greasing points, with self-lubricated bushings all-round.
– Third pulley tensioner, bolt adjustable.
– Built in belt casing.
– Protective bumper.
– Main stand.
– Track pins and PTO shaft.
– Accident prevention precautions according to EC regulations.
– Note: all models are supplied with hammers standard, unless otherwise (with blades) specified by the order.
Models
 |  |  |  |  |  |  | |
|---|---|---|---|---|---|---|---|
| MOD. | MM | KG | Nº | Nº | C.V. | R.P.M. | Nº |
| TSC160 | 1600 | 875 | 16 | 32+16 | 60-110 | 540 | 4 |
| TSC180 | 1800 | 905 | 20 | 40+20 | 70-110 | 540 | 4 |
| TSC200 | 2000 | 975 | 22 | 44+22 | 80-150 | 540 | 4 |
| TSC220 | 2200 | 1060 | 22 | 44+22 | 90-180 | 540 | 4 |
| TSC250 | 2500 | 1260 | 24 | 48+24 | 110-180 | 540 | 5 |
 |  |  |  |  |  |  |  |  |  | |
|---|---|---|---|---|---|---|---|---|---|---|
| MOD. | MM | MM | MM | MM | MM | MM | MM | MM | º | º |
| TSC160 | 1840 | 1076 | 507 | 382 | 1458 | 2500 | 2630 | 2260 | 90º | -42º |
| TSC180 | 2040 | 1076 | 507 | 382 | 1658 | 2500 | 2830 | 2260 | 90º | -42º |
| TSC200 | 2240 | 1076 | 507 | 382 | 1858 | 2500 | 3030 | 2260 | 90º | -42º |
| TSC220 | 2440 | 1076 | 507 | 382 | 2058 | 2500 | 3230 | 2260 | 90º | -42º |
| TSC250 | 2740 | 1076 | 507 | 382 | 2358 | 2500 | 2530 | 2260 | 90º | -42º |
